Cleaning tough surfaces can sometimes be a very hard task and they often require a lot more effort than you first thought. Sometimes you need to learn and apply specialised techniques to clean some surfaces to a spotless condition. Whether it’s hardwood floor, stainless steel, or glass shower doors, each surface has its own techniques that are required to clean them thoroughly. In this article, we will give you al the techniques you will need to clean all the tough surfaces in your home.

Tile grout can accumulate a lot of dirt, grime, and stains over time, especially in rooms such as kitchens and bathrooms. To tackle tile grout, you can make a homemade solution by mixing equal parts water and vinegar. You must apply this solution to the grout lines and let it soak in for around ten minutes. Then you will need to use a small brush, such as a toothbrush to scrub the grout lines. If the stains are more serious, you may need to make a paste out of baking soda and water. Scrub this solution into the grout and rinse it after. After you have finished cleaning your grout, you should use a grout sealer to protect them from further stains and grime build up.

Hardwood floors are a great talking point in your home, as they add elegance and warmth to the room. However, they can be sensitive to excessive moisture and harsh chemicals. To be able to clean hardwood floors correctly, you will need to first wipe them down to remove any dust and debris. Then use a damp cloth with a mild pH-neutral wood cleaner. If you are dealing with a tougher stain, you can gently scrub the area with a fine bristle brush. If you have a lot of hardwood floors, you may want to contact a Hard Floor Cleaning Gloucester company, who can take care of your hardwood floors for you.

Almost every homeowner will eventually have to deal with cleaning their glass shower doors. Although it can seem like a tough challenge, if you mix equal parts white vinegar and water into a spray bottle, you can then spray the solution over your glass shower doors and let it sit for around 10 to 15 minutes. After this, use a sponge or cloth to wipe down the glass. After, rinse thoroughly and your glass should look as good as new.